Fourier MultiLogPRO User Manual page 38

The setup dialog opens with the default setup:
4. Change the operating mode to Continuous or Individual
experiment
5. Click OK to complete the default setup.
To change the setup:
Rate
Select the desired sampling rate in the Rate drop list
Operating mode
Select the desired operating mode in the Operating mode drop list
Saving Interval
Select the time interval between two successive savings (in continuous mode
only) in the Saving Interval drop list
Except for the rainfall, the wind direction, the wind gust and the
minimum/maximum temperatures, WeatherLab saves an average of all the
samples in a given saving interval.
Wind direction calibration
Before you begin collecting data you should calibrate the Wind direction sensor:
1. Use the compass to point the wind vane to the north. Fix its position
with a strip of masking tape.
32 WeatherLab