Open Files; Change Units Settings - Fourier MultiLogPRO User Manual

3. After downloading is completed, WeatherLab displays the data on
the offline graph and prompts to Save as... dialog.
4. Enter a new name in the File name box.
5. To save the data in a different folder, select a drive and/or folder
from the Save in box.
6. Click Save.
File Location
To select file location:
1. Click File on the menu bar, then click Stored data folder...
2. To change the file location, click Browse and navigate to the
desired folder.
3. Click OK.

5.3.8 Open Files

You can open and display station archive files or files that were saved as single
experiment files. The data can be displayed in Offline graph screen or in table
format (see on page 40)

5.3.9 Change Units Settings

WeatherLab allows you to change the temperature, pressure, wind speed and
rainfall units.
To change units:
1. Click File on the menu bar, then click Choice of units
36 WeatherLab