Station Settings - Fourier MultiLogPRO User Manual

To operate a stand-alone experiment:
1. Connect the Weather Station to a computer and run the
WeatherLab.
2. Click Logger on the menu bar, and then click setup to open the
Setup dialog.
3. In the operating mode box select Individual experiment.
4. In the Rate box, select the desired rate.
5. Click OK.
6. Click Logger on the menu bar, and then click Run.
7. You can now disconnect the computer from the station.

5.3.6 Station Settings

Use the station settings dialog to enter station name and location, to select rain
season starting month and to calibrate the station to the north
1. Click File on the menu bar, and then click Station Settings to open
the Station Settings dialog:
34 WeatherLab