Pcl Menu - Genicom LN28 User Giude

PCL Menu

The PCL Menu provides access to the PCL settings. Use the following procedure to enter the PCL
menu:
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text "PCL Menu" is shown on the second line of the dis-
play.
3. Press the SELECT button to enter the PCL menu.
4. Press the NEXT button to move through the submenus: Print PS Errors, Manual Feed TO.
5. Press the SELECT button to enter a submenu.
6. Use the procedures in the following table to access and change the PCL settings:
Submenus Default Setting
Orientation Portrait
This submenu allows
you to choose the
orientation of the
page.
Font Source Internal
This submenu allows
you to choose a font
source.
Font Number 0
This submenu allows
you to set the font
number.
Pitch 10.00
This submenu allows
you to change the
pitch of text.
Symbol Set 10U:PC-8 CP437
This submenu allows
you to choose a
symbol set.
Nov 00
GENICOM LN28 and microLaser 280 User Guide 3-11
Available Settings
Portrait
Landscape
Internal
Numbers 0-?
0.08 - 100.00
10U:PC-8 CP437 15U:Pi Font
11U:PC-8 D/N 1U: Legal
12U:PC-850 1E: ISO4 UK
17U:PC-852 0U:ISO6 ASCII
9T:PC-Turkish 0U:ISO11 Swedish
19U:WIN Latin1 0I:ISO15 Italian
9E:WIN Latin2 2S:ISO17 Spanish
5T:WIN Latin5 1G:ISO21 German
7J:Desk Top 0D:ISO60 Norweg.
10J:PS Text 1F:ISO69 French
13J:Ventura Intl 9U:WIN3.0 Latin1
14J:Ventura US 8U:Roman 8
6J:Microsoft Pub 0N:ISO 8859-1
8M:Math-8 2N:ISO 8859-2
PS:Math 5N:ISO 8859-5
6M:Ventura Math
Genicom
PCL Menu
Procedure for Changing Setting
1. Press NEXT or PREVIOUS to
toggle between PORTRAIT and
LANDSCAPE.
2. Press SELECT to choose and
save an orientation.
1. Press NEXT or PREVIOUS to
scroll through the available font
sources.
2. Press SELECT to choose and
set a source.
1. Press NEXT or PREVIOUS to
increase or decrease the font
number.
2. Press SELECT to save this
setting.
1. Press NEXT or PREVIOUS to
increase or decrease the pitch.
2. Press SELECT to save this
setting.
1. Press NEXT or PREVIOUS to
scroll through the available
symbol sets.
2. Press SELECT to choose and
set a symbol set.
Publication No. GEG-99018A