Table of Contents
Advertisement
Interface Menu
The Interface Menu provides access to the printer interface settings. Use the following procedure to
enter the interface menu:
1.
Press the MENU button on the control panel.
2.
Press the NEXT button until the text "Interface Menu" is shown on the second line of the
display.
3.
Press the SELECT button to enter the interface menu.
4.
Press the NEXT button to move through the submenus: Port, Parallel Setup, and USB
Setup.
5.
Use the procedures in the following table to access and change the printer interface settings:
Submenus
Port
This submenu allows you
to choose the type of
interface. The parallel and
USB ports can not be ON
simultaneously.
Parallel Setup
This submenu allows you
to set up the parallel
interface. When the
Parallel port is on, the
USB port is off.
USB Setup
This submenu allows you
to choose set up the USB
interface. When the USB
port is on, the parallel port
is off.
PS Menu
The PS Menu provides access to the PostScript settings. Use the following procedure to enter the
PS Menu:
1.
Press the MENU button on the control panel.
2.
Press the NEXT button until the text "PS Menu" is shown on the second line of the display.
Nov 00
Default
Available
Setting
Settings
Parallel:
Parallel :
On
On, Off
USB:
USB:
Off
On, Off
Interpreter:
Interpreter:
Auto Switch
Auto Switch
PCL
Format:
PostScript 3
Raw
Format:
Mode:
Raw
Bidirectional
Normal
Binary
Mode:
Bidirectional
Standard
Interpreter:
Interpreter:
Auto Switch
Auto Switch
PCL
Format:
PostScript 3
Raw
Format:
Raw
Normal
Binary
Genicom
GENICOM LN28 and microLaser 280 User Guide 3-9
Procedure for Changing Setting
1. Press NEXT or PREVIOUS to toggle between
PARALLEL and USB.
2. Press SELECT to save this setting.
1. Press NEXT or PREVIOUS to scroll through the
INTERPRETER, FORMAT, and MODE submenus.
2. Press SELECT to choose a submenu.
3. Press NEXT or PREVIOUS to scroll through the
settings.
4. Press SELECT to choose and save a setting.
1. Press NEXT or PREVIOUS to toggle between
INTERPRETER and FORMAT submenus.
2. Press SELECT to choose either submenu.
3. Press NEXT or PREVIOUS to scroll through the
settings.
4. Press SELECT to save this setting.
Interface Menu
Publication No. GEG-99018A
Advertisement
Table of Contents
