Table of Contents
Advertisement
ii
GENICOM LN28 and microLaser 280 User Guide
Trademarks
The following are trademarks or registered trademarks of their respective owners. Other product names
mentioned in this manual may also be trademarks or registered trademarks of their respective owners.
Registered trademarks are registered in the United States Patent and Trademark Office; some trademarks may
also be registered in other countries. GENICOM LLC, the GENICOM LLC logo, are registered trademarks of
GENICOM LLC. PostScript is a trademark of Adobe Systems Incorporated for a page description language and
may be registered in certain jurisdictions.
Proprietary Statement
The digitally encoded software included with your LN28 and microLaser 280 is Copyrighted © 1999 by
GENICOM LLC. All Rights Reserved. This software may not be reproduced, modified, displayed, transferred, or
copied in any form or in any manner or on any media, in whole or in part, without the express written permission
of GENICOM LLC.
Copyright Notice
This manual is Copyrighted © 1999 by GENICOM LLC, 4500 Daly Drive, Suite 100, Chantilly, VA 20151. All
Rights Reserved. This manual may not be copied in whole or in part, nor transferred to any other media or
language, without the express written permission of GENICOM LLC.
The specifications of your printer and the content of this publication are subject to change without prior notice.
Every attempt has been made to verify the accuracy of the content herein. Should you wish to report comments
or suggestions regarding this publication, feel free to contact:
GENICOM LLC
ATTN: Nonimpact Technical Publications
900 Clopper Road, Suite 110
Gaithersburg, MD 20878
Publication No. GEG-99018A
Nov 00
Genicom
Advertisement
Table of Contents
