11.
Verify that the power switch of the printer is in the [O] (off) position, then insert the plug of
the power cord into the AC outlet.
12.
Turn the printer on by pressing [ I ] on the power switch on the right side of the printer.
Cleaning Feed Rolls
Rubber feed rolls drive sheets of paper out of the front paper tray into the printer, and also drive
sheets of paper out of the main paper tray into the printer. These feed rolls wear with normal use
and eventually become coated with paper dust and must be cleaned. Frequent feed jams in the front
tray or main tray indicate that the feed rolls need to be cleaned.
Main Feed Roll
Use the following procedure to clean the main feed roll:
Nov 00
GENICOM LN28 and microLaser 280 User Guide 4-19
2
1
Genicom
Cleaning the Printer
SIB048F
Publication No. GEG-99018A