Clearing An E0 Jam - Genicom LN28 User Giude

21. Close the top cover.
22. Reinstall any other trays that you removed.

Clearing an E0 Jam

If an E0 error code precedes the error message on the first line of the control panel display, paper
has jammed at the high capacity feeder. Use the following procedure to clear a paper jam in this
location:
1. Pull the high capacity feeder paper drawer out.
2. Remove any jammed paper from the paper drawer.
Nov 00
GENICOM LN28 and microLaser 280 User Guide 5-23
Genicom
Paper Jams
Publication No. GEG-99018A