Table of Contents
Advertisement
Printer Location Requirements
Printer Weight and Dimensions
This printer weighs approximately 55 lbs (25 kg) and should always be lifted by two people. The
dimensions of the printer are listed below.
•
Printer Height: 15.6 in (395 mm)
•
Printer Width (left to right): 19.3 in (490 mm)
•
Printer Depth (front to back): 18.1 in (460 mm)
Space Requirements
A certain amount of space is required for proper operation of the printer and also for performing
printer maintenance and replacing consumables. The following figures indicate the necessary clear-
ances for each side of the printer.
CAUTION: There is a ventilation opening on the left side of the printer. To avoid overheating
and fire hazards, be sure to leave a clearance of at least 8 inches (200 mm) between this
opening and the nearest wall or other surface.
Nov 00
4 inches
(100 mm)
20 inches
(500 mm)
8 inches
(200 mm)
Figure 1-1: Top view of the printer.
Genicom
GENICOM LN28 and microLaser 280 User Guide 1-3
Printer Location Requirements
30 inches
(760 mm)
Publication No. GEG-99018A
Advertisement
Table of Contents
