Clearing An E8 Jam - Genicom LN28 User Giude

5-26 GENICOM LN28 and microLaser 280 User Guide
Paper Jams
2. Reinsert the duplex printing unit into the printer, and close the rear cover.
3. Check the display and make sure the printer is ready for printing.

Clearing an E8 Jam

If an E8 error code precedes the error message on the first line of the control panel display, paper
has jammed at the offset output tray. Use the following procedure to clear a paper jam in this loca-
tion:
1. Open the rear cover of the offset output tray by pulling on the recessed area on the rear cover.
2. Remove any jammed paper.
Publication No. GEG-99018A
Genicom
Nov 00