Led Indicators; Pushbuttons - Genicom LN28 User Giude

LED Indicators

The LED indicators also indicate printer status. The four indicators can each be on, off, or blink-
ing, indicating different phases of printer operation. The table below explains the LED indicators.
LED

Pushbuttons

The control panel pushbuttons allow you to access and navigate menus, and also assist you in recov-
ering from printer errors. The table below explains the functions of the eight pushbuttons.
Pushbutton
Nov 00
Color When Off
Green Printer is NOT
READY
Green Printer is IDLE
Green POWER is off
Yellow Printer is not in
error mode
Function
START/STOP—Push this button to start or stop the printer, or to exit the menu
system.
MENU—Push this button to enter the menu system.
NEXT—Push this button to move to the next menu, submenu, or setting within
the same level of the menu structure.
SELECT—Push this button to select the menu or submenu that is shown on
the second line of the display or to choose and save the setting shown on the
second line of the display.
CANCEL—Push this button to cancel an action.
GENICOM LN28 and microLaser 280 User Guide 3-3
When On
Printer is READY
Printer is ACTIVE
(processing a job)
POWER is on
There is an error that
requires user intervention,
such as a paper jam, a
service call required, etc.
Genicom
Control Panel Features
When Blinking
N/A
Printer is WAITING (a partial job
has been printed, and the printer
is waiting for additional job data)
Power Saver Mode ON
N/A
Publication No. GEG-99018A