9-10
GENICOM LN28 and microLaser 280 User Guide
Solving Offset Output Tray Problems
Clearing an Offset Output Tray Paper Jam
If an E8 error code precedes the error message on the first line of the control panel display, paper
has jammed at the offset output tray. Use the following procedure to clear a paper jam in this loca-
tion:
1.
Pull on the hand grip on the rear of the offset output tray to open the rear cover.
2.
Remove any jammed paper from the interior of the offset output tray.
3.
Close the rear cover of the offset output tray.
Publication No. GEG-99018A
Genicom
Nov 00