Solving 500 Sheet Feeder Problems - Genicom LN28 User Giude

7-16 GENICOM LN28 and microLaser 280 User Guide

Solving 500 Sheet Feeder Problems

Solving 500 Sheet Feeder Problems

When there is a problem with the 500 sheet feeder, the printer control panel displays an error code
and error message. Most paper feeder error codes indicate routine status conditions such as a paper
tray running out of paper or a paper jam in a specific area of the paper feeder. Some error codes
indicate much more serious problems that may require the help of a service technician.
• If the paper feeder is inoperative after installation, refer to "Installation Problems" on page
7-17 and complete the recommended procedure.
• If the printer control panel displays an error message or an error code, refer to "Interpreting
Paper Feeder Error Messages" on page 7-17.
• If you have a paper feeder problem but the printer control panel does not display an error
message or error code, refer to "Correcting Miscellaneous Paper Feeder Problems" on page
7-23 and follow the directions for correcting that problem.
Publication No. GEG-99018A
7
8
Genicom
Nov 00