Major Components of the Offset Output Tray
The following illustration shows the major components of the offset output tray:.
Installing the Offset Output Tray
Before installing the offset output tray, remove it from its packaging and verify that you have
received the following items. If any of the items are missing or damaged, contact your dealer.
Throughout this procedure, the different sides of the printer are referred to as front, rear, left, and
right. The front of the printer is the side that holds the control panel. The left and right sides are
those to the left and right, respectively, of a person facing the front of the printer.
Nov 00
Paper Guide
Output Tray
Metal Fittings
Figure 9-15: Offset Output Tray Major Components.
Genicom
GENICOM LN28 and microLaser 280 User Guide 9-3
Installing the Offset Output Tray
Exit Rolls
Publication No. GEG-99018A