Installing the 500 Sheet Paper Feeders
Before installing the paper feeder(s), verify that you have received the following items in the paper
feeder shipping box:
500 Sheet Paper Feeder
2 Thumbscrews
Installing One Paper Feeder
Use the following procedure to install one paper feeder:
WARNING: Before installing any options, turn the printer off by pressing [ O ] on the power
switch on the right side of the unit and disconnect the power cord from the AC outlet.
These precautions are necessary to avoid the risk of electric shock.
1.
Remove the 500 sheet paper feeder from its packaging and remove any cardboard inserts and
packing tape. Locate and set aside the small plastic bag containing two thumbscrews.
2.
Place the paper feeder on a sturdy, level surface.
NOTE:
Do not move the printer once the paper feeder is installed.
3.
Remove the paper tray from the paper feeder.
Nov 00
GENICOM LN28 and microLaser 280 User Guide 7-3
Installing the 500 Sheet Paper Feeders
A4/letter
paper tray
A3/Ledger
paper tray
SIB108XB
=
1, 2, 5, 8 - 10,
=
1, 3 - 5, 10,
=
1 - 7, 10,
=
1, 2, 5, 10 - 12,
13 - 14, 18 - 23,
15, 17,
16 - 28
28
24 - 28
18 - 23, 28
A4 / LTR
A3 / TABLOID
1
2
3
4
5
7
8
6
25 kg.
55 lbs.
9
10
11
12
Installation Sheet
Genicom
OR
Publication No. GEG-99018A
SIB028XB
SIB094XB