Interface Menu - Genicom Intelliprint ML450 User Manual

4-10 GENICOM LN45 and Intelliprint mL450 User Guide

Interface Menu

Interface Menu
The Interface Menu provides access to the printer interface settings. Use the following procedure to enter
the interface menu:
Press the MENU button on the control panel.
1.
Press the NEXT button until the text " Interface Menu " is shown on the second line of the display.
2.
Press the SELECT button to enter the interface menu.
3.
Press the NEXT button to move through the submenus: Port , Parallel Setup , and Network
4.
Setup .
Use the procedures in the following table to access and change the printer interface settings:
5.
Submenus
Port
This submenu allows you
to enable the type of
interface.
Publication No. GEG-99126
Default Available
Setting Settings
Parallel: Parallel:
On On, Off
Network Card Network Card 1:
1: On, Off
Off
Genicom
Procedure for Changing Setting
1. Press NEXT or PREVIOUS to toggle between
PARALLEL and NETWORK CARD 1.
2. Press SELECT to save this setting.
Aug 01