To obtain peak performance from the printer, select a location that meets the following
guidelines:
Environments
•
Do not place the printer in a location exposed to direct sunlight or near heaters.
•
Make sure that the room is well-ventilated and free from excessive dust.
•
Do not expose the printer to extreme temperature and humidity levels.
Work Location
•
Place the printer on a stable, level surface.
•
Ensure easy access to the front and rear of the printer by leaving about eight inches (20
cm) of space around the printer. Do not block the air vents 1 on the left side of the
printer.
Power Supply
•
Place the printer near a well-grounded AC power outlet.
•
Use only the power cord supplied with the printer or one recommended by your dealer.
Do not use an extension cord.
•
Do not plug the printer into a power outlet that is shared with heavy industrial
equipment, such as motors, or appliances, such as copiers or coffee makers. Such
equipment often emits electrical noise or causes power degradation.
1-2
Selecting a Good Location
1
Do not Block the Air Vents
Step 1