Switching Unit Of Measurement - Kyocera FS-1028DP Operation Manual

Default Setting (System Menu)
Preset Limit:

Switching Unit of Measurement

Select inch or metric for the unit for paper dimensions.
Use the procedure below to change the input units.
Sys. Menu/Count.: a b
4
User/Job Account
5
User Property
6
Common Settings
*********************
Common Settings: a b
1
Language
*********************
2
Default Screen
3
Sound
Measurement:
1 *inch
*********************
2
mm
8-24
D b
(1 - 999)
**999*
[ Exit ]
[ Exit ]
a b
4
Press the OK key. The Preset Limit menu appears.
5
Press the or
copies.
6
Press the OK key. Completed. is displayed and the
screen returns to the Common Settings menu.
1
In the Sys. Menu/Count. menu, press the
key to select [Common Settings].
2
Press the OK key. The Common Settings menu
appears.
3
Press the or
4
Press the OK key. The Measurement menu
appears.
5
Press the or
6
Press the OK key. Completed. is displayed and the
screen returns to the Common Settings menu.
key to enter the number of
key to select [Measurement].
key to select [inch] or [mm].
OPERATION GUIDE
or