Zoom - Kyocera FS-1028DP Operation Manual

Sending Functions

Zoom

Scans the original by automatically zooming it depending on the sending size.
The table below lists the available options.
Item
100%
Auto
NOTE:
When zooming in or out, see Sending Size on page 5-4 when selecting the sending size.
When Custom Size or Size Entry is selected as the original size, the originals are sent at normal size and
zooming cannot be used.
Depending on the combination of original size and sending size, the image is placed at the edge.
Use the procedure below to enlarge or reduce the original to match the transmission size.
Function Menu:
1 Color Selection g
*********************
2 Original Size
3
Original Image

Zoom:

1 *100%
*********************
2 Auto
5-6
No Zoom (to be scanned at actual size)
Zoomed automatically according to the specified sending size.
1
2
3
4
a b
T
T
[ Exit ]
5
6
a b
7
8
Detail
Press the Send key.
Place the originals on the platen.
Select the transmission size.
Press the Function Menu key. Function Menu
appears.
Press the or key to select [Zoom].
Press the OK key. Zoom appears.
Press the or key to select [100%] or [Auto]
and then press the OK key.
Completed. is displayed and the screen returns to
the basic screen for sending.
Specify the destination, and press the Start key to
start sending.
OPERATION GUIDE