Kyocera FS-1028DP Operation Manual page 316

Default Setting (System Menu)
Item
SMB
SMTP
(E-mail TX)
POP3
(E-mail RX)
HTTP
HTTPS
IPP
IPP over SSL
* : The machine must be restarted after the setting is changed.
×: The machine does not need to be restarted after the setting is changed.
Use the procedure below.
Sys. Menu/Count.:a b
1
Report
2 Counter
3
********************* System
Login User Name:
*******************
Login Password:
System:
1
********************* Network Setting
2
I/F Block Set.
3
Security Level
8-122
Description
Select whether or not to send documents
using SMB.
Select whether or not to send e-mail using
SMTP.
Select whether or not to receive e-mail using
POP3.
Select whether or not to communicate using
HTTP.
Select whether or not to communicate using
HTTPS.
SSL must be set to [On] in SSL Setting on
page 8-124.
Select whether or not to use IPP, and the
number of the port to be used.
Select whether or not to use IPP over SSL.
SSL must be set to [On] in SSL Setting on
page 8-124.
[ Exit
L b
[ Login
a b
[ Exit
On
Off
Off
On
On
Off
Port number: 631
On
1
In the Sys. Menu/Count. menu, press the
key to select [System], and press the OK key.
]
A login screen will appear. Then, enter the user ID
and password with administrator privileges to log
in, and press [Login] (the Right Select key).
]
2
The System menu appears.
]
Restarting the
Default Setting
OPERATION GUIDE
System*
×
×
or