Interface Block Setting - Kyocera FS-1028DP Operation Manual

Interface Block Setting

This allows you to protect this machine by blocking the interface with external devices such as USB hosts or
optional interfaces.
The following interface block settings are available:
• USB Host (USB memory slot setting)
• USB Device (USB interface setting)
• Optional interface (Optional interface card setting)
USB Host (USB memory slot setting)
This locks and protects the USB memory slot (A1) or USB port (A2) (USB host). The default setting is Unblock.
Use the procedure below to specify the USB Host setting.
Sys. Menu/Count.:a b
1
Report
2
Counter
3 System
*********************
Login User Name:
*******************
Login Password:
System:
1
Network Setting
2
********************* I/F Block Set.
3 Security Level
I/F Block Set.:
1 USB Host
*********************
2
USB Device
3 Option I/F
OPERATION GUIDE
1
[ Exit ]
L b
[ Login ]
2
a b
[ Exit ]
3
4
a b
[ Exit ]
5
Default Setting (System Menu)
In the Sys. Menu/Count. menu, press the
key to select [System], and press the OK key.
A login screen will appear. Then, enter the user ID
and password with administrator privileges to log
in, and press [Login] (the Right Select key).
The System menu appears.
Press the or key to select [I/F Block Set.].
Press the OK key. The I/F Block Set. menu
appears.
Press the or key to select [USB Host].
or
8
8-131