Managing Accounts - Kyocera FS-1028DP Operation Manual

Management

Managing Accounts

This section explains how to add a new account. The following entries are required.
Item
Account Name
Account ID
Restriction
Use the procedure below to register a new account.
NOTE:
Refer to Character Entry Method on Appendix-5 for details on entering characters.
Sys. Menu/Count.:a b
4 User/Job Account
*********************
5
User Property
6
Common Settings
Login User Name
*******************
Login Password:
User/Job Account:a b
1
User Login Set.
2 Job Account.Set.
*********************
3
Unknown ID Job
11-18
Enter the account name (up to 32 characters).
Enter the account ID as many as eight digits (between 0 and 99999999).
This Prohibits printing/scanning or restricts the number of sheets to load.
Refer to Restricting the Use of the Machine on page 11-24.
[ Exit ]
L b
[ Login ]
[ Exit ]
Description
1
Press the System Menu/Counter key on the main
unit operation panel.
2
In the Sys. Menu/Count. menu, press the
key to select [User/Job Account], and then press
the OK key.
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
4
In the User/Job Account menu, press the
key to select [Job Account. Set.].
or
or
OPERATION GUIDE