Table of Contents
Advertisement
Adjust/Maint.:
1
*********************
Copy Denst. Adj.
2
Send/Box Density
3
Correct. Bk Line
Service Setting: a b
1
*********************
Service Status
2
Network Status
3
New Developer
Print.
Are you sure?
z Network Status
[
Yes
NOTE:
When acceptance of jobs is prohibited, Print, storing functions are restricted now. is displayed and the
output is canceled.
Send Result Report
Automatically print a report of transmission result when a transmission is complete. The table below shows the
available settings. The default setting is Error Only.
Item
Off
On
Error Only
Use the procedure below to send a Result Report.
OPERATION GUIDE
a b
[ Exit
]
[ Exit
]
] [
No
]
No result report printed.
Result report automatically printed. Transmitted images can also be attached.
Result report printed only when a transmission ends in an error. If two or more
destinations are registered, the reports are printed only for the destinations
with the errors. Transmitted images can also be attached.
Default Setting (System Menu)
2
Press the OK key. The Adjust/Maint. menu
appears.
3
Press the
or
key to select [Service Setting].
4
Press the OK key. Service Setting appears.
5
Press the
or
key to select [Service Status] or
[Network Status].
6
Press the OK key. A confirmation screen appears.
The screen shown is the one when Network Status
is selected.
7
Press [Yes] (the Left Select key). The selected
report is output. Accepted. is displayed and the
screen returns to the Service Setting menu.
Description
8
8-77
Advertisement
Table of Contents
