Ftp Encrypted Tx - Kyocera FS-1028DP Operation Manual

FTP Encrypted TX

This allows you to encrypt documents when you send them. If you select [On] in this option, you can then select
the encryption method in the basic send screen.
Use the procedure below to scan and send originals as encrypted files.
Function Menu:
1 Color Selection g
*********************
2
Original Size
3
Original Image
FTP Encrypted TX: a b
1 *Off
*********************
2
On
OPERATION GUIDE
1
2
3
a b
T
T
[ Exit ]
4
5
6
NOTE:
selected in Function Menu.
NOTE:
COMMAND CENTER. Be sure that SSL of Secure
Protocol Settings is On and more than two effective
encryptions are selected in Clientside Settings. For
details, refer to the KYOCERA COMMAND CENTER
Operation Guide.
Press the Send key.
Place the originals in the document processor or on
the platen.
Press the Function Menu key. Function Menu
appears.
Press the or key to select [FTP Encrypted
TX].
Press the OK key. FTP Encrypted TX appears.
Press the or key to select [On] and then press
the OK key.
Completed. is displayed and the screen returns to
the basic screen for sending.
Press the Reset key to reset the settings
Click Advanced -> Secure Protocols in the
Sending Functions
5
5-25