Kyocera FS-1028DP Operation Manual page 100

Basic Operation
Orig. Binding:
1 *o Left/Right
*********************
2 p Top
Orig.Orientation: a b
1 *c Top Edge Top
*********************
2 d Top Edge left
Orig. Binding:
1 *o Left/Right
*********************
2 p Top
Finish. Binding: a b
1 *o Left/Right
*********************
2 p Top
Orig.Orientation: a b
1 *c Top Edge Top
*********************
2 d Top Edge left
Scanning...
Job No.:
Page(s):
[ Cancel ]
3-16
If you select [2-sided>>1-sided], press [Detail] (the
a b
Right Select key) and you can select the binding
edge of the original.
After pressing the OK key, select the binding edge
of the original and finished copies, and the original
setting orientation.
If you select [2-sided>>2-sided], press [Detail] (the
a b
Right Select key) and you can select the binding
edge of the original.
After pressing the OK key, select the binding edge
of the finished copies.
After pressing the OK key, select the original
setting orientation.
5
Press the OK key. Completed. is displayed and the
screen returns to the basic screen.
6
Press the Start key. Copying begins.
If the original is placed on the platen, replace it with
the next one before pressing the Start key.
9999
1
OPERATION GUIDE