Kyocera FS-1028DP Operation Manual page 66

Preparation before Use
2
Enter the correct settings in each field.
The settings to be specified in the SMTP settings screen are shown below.
Item
SMTP Protocol
SMTP Port Number
SMTP Server Name
SMTP Server Timeout
Authentication
Protocol
Authenticate as
Login User Name
Login Password
POP before SMTP
Timeout
Test
E-mail Size Limit
Sender Address
Signature
Domain Restriction
3
Click Submit.
2-26
Enables or disables SMTP protocol. To use E-mail, this protocol must be
enabled.
Set the SMTP Port Number or use the SMTP default port 25.
Enter the SMTP server IP address or its name. The maximum length of the
SMTP server name and IP address is 64 characters. If entering the name, a DNS
server address must also be configured. The DNS server address may be
entered on the TCP/IP General tab.
Enter the default time out for the server in seconds.
Enables or disables the SMTP authentication protocol or sets POP before SMTP
as the protocol. The SMTP authentication supports Microsoft Exchange 2000.
Authentication can be set from three POP3 accounts or you can choose a
different account.
When Other is selected for Authenticate, the login user name set here will be
used for SMTP authentication. The maximum length of the login user name is
64 characters.
When Other is selected for Authenticate, the password set here will be used for
authentication. The maximum length of the login password is 64 characters.
Enter the timeout (in seconds) if you chose POP before SMTP as the
Authentication Protocol.
This will test if the SMTP connection can be successfully established.
Enter the maximum size of E-mail that can be sent in kilobytes. When the value is
0, the limitation for E-mail size is disabled.
Enter the E-mail address of the person responsible for the machine, such as the
machine administrator, so that a reply or non-delivery report will go to a person
rather than to the machine. The sender address must be entered correctly for
SMTP authentication. The maximum length of the sender address is
128 characters.
Enter the signature. The signature is free form text that will appear at the end of
the E-mail body. It is often used for further identification of the machine. The
maximum length of the signature is 512 characters.
Enter the domain names that can be permitted or rejected. The maximum length
of the domain name is 32 characters. You can also specify E-mail addresses.
Description
OPERATION GUIDE