Auto Drawer Switching - Kyocera KM-1620 Operation Manual

Section 6 COPIER MANAGEMENT
Selected Drawer
When the optional Paper Feeder is installed, priority will be
assigned to the drawer that is selected automatically. Manual
paper feeding cannot be set using the Selected Drawer function.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
2
Press either the Zoom (+) or Zoom (–) key to display "F14".
Inch specifications
3
Press the [Enter] key.
Inch specifications
4
Press either the Zoom (+) key or the Zoom (–) key and select
the drawer to be given priority for use.
Inch specifications
Note
The range of selection will vary in accordance with the
number of drawers installed.
6-20
Metric specifications
Metric specifications
Metric specifications
Metric specifications
5
Press the [Enter] key.
The display will return to that of Step 2.
Inch specifications

Auto Drawer Switching

When the optional Paper Feeder has been installed, select whether
or not to use the Auto Drawer Switching function.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
2
Press either the Zoom (+) or Zoom (–) key to display "F15".
Inch specifications
3
Press the [Enter] key.
Inch specifications
Metric specifications
Metric specifications
Metric specifications
Metric specifications