Kyocera FS-1028DP Operation Manual page 287

Timer Setting:
1
********************* Err. Clear Timer
2 Sleep Timer
3
PanelReset Timer
Auto Sleep:
1
Off
2 *On
*********************
Sleep Timer
If you select [On] for Auto Sleep, set the amount of time to wait before Auto Sleep. Options are between 1 and
240 minutes (every one minute)
Use the procedure below to set the Auto Sleep time. The default setting is 15 minutes.
Sys. Menu/Count.:a b
4
User/Job Account
5
User Property
6
********************* Common Settings
Common Settings: a b
1
********************* Language
2 Default Screen
3
Sound
OPERATION GUIDE
4
a b
[ Exit ]
5
6
a b
7
8
1
[ Exit ]
2
[ Exit ]
3
Default Setting (System Menu)
The Timer Settings menu appears.
Press the or key to select [Auto Sleep].
Press the OK key. Auto Sleep appears.
Press the or key to select [Off] or [On].
Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
In the Sys. Menu/Count. menu, press the
key to select [Common Settings].
Press the OK key. The Common Settings menu
appears.
Press the or key to select [Timer Setting], and
press the OK key.
8
or
8-93