Table of Contents
Advertisement
Default Setting (System Menu)
Network Security
The network security functions can be set up to protect printer operation and the print data.
The following network security settings are available.
•
SSL Setting ...8-124
•
SNMPv3 Setting ...8-129
•
IPSec Setting ...8-129
SSL Setting
This allows you to use SSL network security for communication. You can use SSL Setup to select whether or
not SSL is used and to specify the IPP port and HTTP port security settings.
SSL
Make this setting Make this setting when you use SSL. The default setting is Off.
Use the procedure below to make the setting.
Sys. Menu/Count.:a b
1
Report
2
Counter
3
*********************
System
Login User Name:
*******************
Login Password:
System:
1
*********************
Network Setting
2
I/F Block Set.
3
Security Level
8-124
1
[ Exit
]
L b
[ Login
]
2
a b
[ Exit
]
3
In the Sys. Menu/Count. menu, press the
key to select [System], and press the OK key.
A login screen will appear. Then, enter the user ID
and password with administrator privileges to log
in, and press [Login] (the Right Select key).
The System menu appears.
Press the
or
key to select [Network Setting].
or
OPERATION GUIDE
Advertisement
Table of Contents
