When KPDL(Auto) Is Selected for Emulation
If you use the KPDL(Auto) emulation mode, KPDL and another emulation mode can be automatically switched
according to the data (alternative emulation).
For alternative emulation, you can select one of the following printers. The default setting is PCL6.
•
Line Printer
•
IBM Proprinter
•
DIABLO 630
•
EPSON LQ-850
•
PCL6
Also, as when you select [KPDL], set whether or not to output KPDL error reports. The default setting is Off.
Use the procedure below to make the setting.
Emulation Set.:
5
PCL6
6
KPDL
7
KPDL(Auto)
*********************
Alt. Emulation:
3
DIABLO 630
4
EPSON LQ-850
5 *PCL6
*********************
KPDL Error Rpt:
1 *Off
*********************
2
On
OPERATION GUIDE
3
Press the
4
Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
1
In Emulation Set, press the
a b
[KPDL(Auto)].
2
Press the OK key. Alt. Emulation appears.
a b
3
Press the
alternative emulation.
4
Press the OK key. KPDL Error Rpt appears.
a b
5
Press the
6
Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Default Setting (System Menu)
or
key to select [Off] or [On].
or
key to select
or
key to select the printer for
or
key to select [Off] or [On].
8
8-65