Table of Contents
Advertisement
Copying Functions
Continuous Scan
When a large number of originals cannot be placed in the document processor at one time, the originals can be
scanned in separate batches and then copied as one job. With this function, originals are scanned until you
press [End Scan] (the Right Select key).
The procedure for making copies using Continuous Scan is explained below.
Function Menu:
1
Paper Selection g
*********************
2
Collate
3
Duplex
Continuous Scan: a b
1 *Off
*********************
2
On
4-14
1
2
a b
T
T
[ Exit
]
3
4
5
6
7
NOTE:
selected in Function Menu.
Press the Copy key.
Press the Function Menu key. Function Menu
appears.
Press the
or
key to select [Continuous Scan].
Press the OK key. Continuous Scan appears.
Press the
or
key to select [On] and then press
the OK key.
Completed. is displayed and the screen returns to
the basic screen for copying.
Place the originals in the document processor or on
the platen and press the Start key.
Place the next original and press the Start key.
Repeat these steps to scan the remaining originals.
After scanning all originals, press [End Scan] (the
Right Select key) to start copying.
Press the Reset key to reset the settings
OPERATION GUIDE
Advertisement
Table of Contents
