Table of Contents
Advertisement
Bonjour Settings
Select whether or not to use Bonjour. The default setting is Off.
Use the procedure below to specify the Bonjour setting.
Login User Name:
********************
Login Password:
Sys. Menu/Count.: a b
1
Report
2
Counter
3
*********************
System
Administrator only.
System:
1
Network Setting
*********************
2
I/F Block Set.
3
Security Level
Network Setting: a b
1
TCP/IP Settings
*********************
2
NetWare
3
AppleTalk
OPERATION GUIDE
1
L b
NOTE:
[ Login
]
5 for details on entering characters.
2
[ Exit
]
IMPORTANT: To make the settings, you must have
logged in using a user ID with administrator privileges.
If you have logged in using a user ID without
administrator privileges, the screen will display
Administrator only. and return to the standby screen.
3
a b
[ Exit
]
4
[ Exit
]
Completed. is displayed and the screen returns to
the IPv4 Setting menu.
Press the System Menu/Counter key on the main
unit operation panel.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in.
Refer to Character Entry Method on Appendix-
In the Sys. Menu/Count. menu, press the
key to select [System], and then press the OK key.
In the System menu, press the
[Network Setting].
Press the OK key. The Network Setting menu
appears.
Preparation before Use
or
or
key to select
2-19
2
Advertisement
Table of Contents
