Switching The Fuser Pressure - Kyocera KM-2810 Service Manual

2H9

(2) Switching the fuser pressure

The fuser pressure may be decreased to suppress the print quality problems such as paper creases and curls.
It must be cautioned that decreasing the fuser pressure could cause loose toner fusing.
Procedure
1. Remove the cassette (See page 1-5-6).
2. Open the duplex cover.
3. Slide the fuser lever R and L.
Normal: Flush with the front of the machine.
Fuser pressure decreased: Flush with the
rear of the machine.
1-5-34
Fuser lever R
Duplex cover
Normal
Fuser pressure
decreased
Fuser lever L (R)
Fuser lever L (R)
Figure 1-5-49
Fuser lever L