Responding To Error Messages - Kyocera FS-1028DP Operation Manual

Responding to Error Messages

If the control panel displays any of these messages, follow the corresponding procedure.
Alphanumeric
Error Message
Load paper in cassette
1.
Load paper in MP
Tray.
Toner is running out.
Add toner.
Cannot connect to
Authentication Server.
Cannot duplex print
on this paper.
Incorrect account ID.
Job is canceled.
Close front cover.
Close Document
Processor.
Job Accounting
restriction exceeded.
Cannot print.
Job Accounting
restriction exceeded.
Cannot scan.
OPERATION GUIDE
Checkpoints
Is the indicated cassette out
of paper?
Is the paper of the selected
size loaded in the multi
purpose tray?
–
–
–
Did you select a paper size/
media type that cannot be
duplex printed?
–
Is there any cover which is
open?
Is the document processor
open?
Is the top cover of the
document processor open?
–
–
Corrective Actions
Load paper.
Load the paper in the multi purpose
tray which is of the size and type
indicated on the Message Display.
Prepare the toner container.
Replace the toner container.
Press the OK key and check the
following items:
• Registration to Authentication
Serve
• Password and computer address
for Authentication Server
• Connection of Network
Select the available paper type.
Press the OK key to print without
using Duplex.
This job is canceled because it is
restricted by Job Accounting. Press
the OK key.
Close the cover indicated on the
control panel.
Close the document processor.
Close the top cover of the document
processor.
The job is canceled. Press the OK
key.
The job is canceled. Press the OK
key.
Troubleshooting
Reference
Page
2-28
2-31
9-5
9-5
—
3-14
10
—
—
—
2-43
—
—
10-5