Table of Contents
Advertisement
Sending Functions
Original Size
Select the size of originals that will serve as the basis for scanning. Be sure to select the original size before
starting the sending process.
Choose the original size from the following groups of original size.
Item
Standard
Select from standard sizes.
Sizes
Others
Select from Hagaki and
Custom Original Size *.
*
Regarding the setting method of Custom Original Size, refer to Custom Original Size Setup on page 8-7.
Use the procedure below to select the original size when sending scanned images.
Function Menu:
1
Color Selection g
*********************
2
Original Size
3
Original Image
Original Size:
1 *Letterq
*********************
2
Legalq
3
Statementq
Others:
1 *ISO B5q
*********************
2
Envelope #10
3
Envelope #9
5-2
Detail
Letter, Legal, Statement, Executive, Oficio II, A4, A5, A6,
B5, B6, Folio, 16K
ISO B5, Envelope #10, Envelope #9, Envelope #6,
Envelope Monarch, Envelope DL, Envelope C5, Hagaki,
Oufuku Hagaki, Youkei 4, Youkei 2 and Custom
a b
T
T
[ Exit
]
a b
a b
Size
1
Press the Send key.
2
Place the originals on the platen.
3
Press the Function Menu key. Function Menu
appears.
4
Press the
or
5
Press the OK key. Original Size appears.
6
Press the
or
size and then press the OK key.
If you select [Others], select one of the other
options and then press the OK key.
Completed. is displayed and the screen returns to
the basic screen for sending.
7
Specify the destination, and press the Start key to
start sending.
key to select [Original Size].
key to select the desired original
OPERATION GUIDE
Advertisement
Table of Contents
