Table of Contents
Advertisement
Two-sided to Two-sided
3
1
Original
The procedure for using two-sided/duplex copying is explained below.
Function Menu:
1
Paper Selection g
*********************
2
Collate
3
Duplex
Duplex:
1 *1-sided>>1-sided
*********************
2
1-sided>>2-sided
3
2-sided>>1-sied
Finish. Binding: a b
1 *o Left/Right
*********************
2
p Top
Orig.Orientation: a b
1 *c Top Edge Top
*********************
2
d Top Edge left
OPERATION GUIDE
5
5
3
1
Copy
a b
T
T
[ Exit
]
a b
Produces two-sided copies from two-sided originals.
The optional document processor is required.
NOTE:
The paper sizes supported in Two-sided to
Two-sided are Legal, Letter, Oficio II, Executive, A4,
B5, A5 and Folio.
1
Press the Function Menu key. Function Menu
appears.
2
Press the
or
key to select [Duplex].
3
Press the OK key. Duplex appears.
4
Press the
or
key to select the desired duplex
copying mode.
NOTE:
[2-sided>>1-sided] and [2-sided>>2-sided] are
shown only when the optional document processor
(DP-110) is installed.
If you select [1-sided>>2-sided], press [Detail] (the
Right Select key) and you can select the binding
edge of the finished copies and the original setting
orientation.
After pressing the OK key, select the binding edge
of the finished copies and the original setting
orientation.
Basic Operation
3
3-15
Advertisement
Table of Contents
