Wsd Scan - Kyocera FS-1028DP Operation Manual

WSD Scan

WSD Scan saves images of originals scanned on this machine as files on a WSD-compatible computer.
NOTE:
For information on operating the computer, refer to the operating system help for your computer.
To use WSD Scan, WSD Scan Setup (page 8-119) must be set to [On] in the network settings.
Installing Driver Software to the destination machine
The example shows you how to install the driver software to a Windows Vista PC.
Procedure using this machine
Send to:
2 G Folder(SMB)
3 H Folder(FTP)
4 F WSD Scan
*********************
OPERATION GUIDE
1
Click Start and then Network in the computer.
2
Right-click the machine's icon and then click
Install.
NOTE:
If the User Account Control window appears,
click Continue.
If the Found New Hardware window appears, click
Cancel.
3
During the installation, double-click the icon shown
on the task bar to display the Driver Software
Installation screen. When Your devices are
ready to use is displayed on the Driver Software
Installation screen, the installation is completed.
1
Press the Send key.
2
Place the originals in the document processor or on
the platen.
Displays the screen for sending.
NOTE:
Depending on the settings, the address book
screen may appear. In this event, press [Cancel] to
display the screen for sending.
3
Press the
a b
Sending Functions
or key to select [WSD Scan].
5
5-21