Kyocera FS-1028DP Operation Manual page 366

Management
Deleting a user
Local User List: a b
l DeviceAdmin
l Admin
*********************
l User1
Menu:
1
Detail/Edit
2
********************* Delete
3
Add User
Enabling/Disabling Group Authentication
This enables group authentication using the LDAP server. This menu can be used only when [Netwk Authentic.]
is selected as the user authentication method. For details of LDAP server settings, refer to the Operation Guide
of the LDAP server.
Use the procedure below to enable group authentication.
NOTE:
Refer to Character Entry Method on Appendix-5 for details on entering characters.
Login User Name
*******************
Login Password:
11-10
1
[ Menu ]
2
a b
3
1
L b
[ Login ]
Press [Yes] (the Left Select key). The user
information is changed and the screen returns to
Local User List.
Press the or key to select the user you want
to delete, and then press [Menu] (the Right Select
key).
Press the or key to select [Delete] and then
press the OK key.
In the delete confirmation screen, press [Yes] (the
Left Select key). The user is deleted and the
screen returns to Local User List.
Press the System Menu/Counter key on the main
unit operation panel.
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
OPERATION GUIDE