Default Setting (System Menu)
LDAP Security
Specify the protocol to be used for LDAP. The default setting is Off.
Use the procedure below to make the setting.
Sys. Menu/Count.:a b
1
Report
2
Counter
3
*********************
System
Login User Name:
*******************
Login Password:
System:
1
Network Setting
*********************
2
I/F Block Set.
3
Security Level
Network Setting: a b
7
Secure Protocol
*********************
8
Host Name
9
LAN Interface
8-128
9
10
1
[ Exit
]
L b
[ Login
]
2
a b
[ Exit
]
3
4
[ Exit
]
5
Press the
or
key to select [HTTP/HTTPS] or
[HTTPS only].
Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
In the Sys. Menu/Count. menu, press the
key to select [System], and press the OK key.
A login screen will appear. Then, enter the user ID
and password with administrator privileges to log
in, and press [Login] (the Right Select key).
The System menu appears.
Press the
or
key to select [Network Setting].
Press the OK key. The Network Setting menu
appears.
Press the
or
key to select [Secure Protocol].
or
OPERATION GUIDE