Adjusting Density - Kyocera FS-1028DP Operation Manual

Adjusting Density

Use the procedure below to adjust the density when scanning the originals.
The table below shows the available settings.
Item
Manual
Auto
The procedure for adjusting the density is explained below.
Function Menu:
1 Color Selection g
*********************
2
Original Size
3
Original Image
Density:
1 *Auto
*********************
2
Manual
OPERATION GUIDE
Adjust density using 7 levels.
Optimum density is selected according to the density of the original.
1
2
3
a b
T
T
[ Exit ]
4
5
a b
6
7
8
NOTE:
selected in Function Menu.
Detail
Press the Send key.
Place the originals on the platen.
Press the Function Menu key. Function Menu
appears.
Press the or key to select [Density].
Press the OK key. Density appears.
Press the or key to select [Auto] or [Manual].
If you select [Manual], press the OK key, and then
select the density on the next screen.
Press the OK key.
Completed. is displayed and the screen returns to
the basic screen for sending.
Specify the destination, and press the Start key to
start sending.
Press the Reset key to reset the settings
Sending Functions
5
5-15