Kyocera FS-1028DP Operation Manual page 107

Dest. Confirm.:
p Morgan@kyoceramitaN
*********************
p aaaaaaaaa@kyoceramN
p bbbbbbbbb@kyoceramN
OPERATION GUIDE
6
7
a b
[ Exit ]
8
NOTE:
before transmission (page 8-60) is set to [On], the
Confirm Destination screen appears when the Start
key is pressed. For more information, refer to Confirm
Destination Screen on page 3-28.
If there are additional destinations, press the Add
Destination key. Repeat steps 2 to 5 to enter
additional destinations. Up to 100 destinations can
be specified.
Press the Confirm Destination key to confirm the
registered destinations.
Press the or key to select a destination and
press the OK key. Then, you can edit or delete the
destination.
Press [Exit] (the Right Select key) to return to the
basic screen.
Press the Start key. Transmission starts.
If the screen for confirming the destination
Basic Operation
3
3-23