Kyocera FS-1028DP Operation Manual page 260

Default Setting (System Menu)
EcoPrint
EcoPrint conserves toner when printing. This is recommended for test copies where faded printing is not a
problem.
Use the procedure below to specify the EcoPrint setting.
Sys. Menu/Count.:a b
7
Copy
8
********************* Printer
9 Send
Printer:
1
Emulation Set.
*********************
2
EcoPrint
3
Override A4/LTR
EcoPrint:
1 *Off
*********************
2
On
Override A4/LTR
Select whether to treat A4 size and Letter, which are similar in size, as the same size when printing. The table
below shows the available settings.
Item
On
Off
Use the procedure below to specify the override A4/Letter setting. The default setting is On.
8-66
[ Exit ]
a b
[ Exit ]
a b
A4 and Letter are regarded as the same in size. The machine will use
whichever size is in the paper source.
A4 and Letter are not regarded as the same in size.
1
In the Sys. Menu/Count. menu, press the
key to select [Printer].
2
Press the OK key. The Printer menu appears.
3
Press the or
4
Press the OK key. EcoPrint appears.
5
Press the or
6
Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Description
key to select [EcoPrint].
key to select [Off] or [On].
OPERATION GUIDE
or