Kyocera FS-1028DP Operation Manual page 203

Orig./Paper Set.: a b
1
********************* Custom Orig.Size
2 Def. Orig. Size
3
Custom PaperSize
Def. Orig. Size:
1 *Letterq
*********************
2 Legalq
3
Statementq
Adding a Custom Size for Paper to Print
Set up a frequently-used custom paper size. The custom size options are displayed on the screen to select
paper.
The table below lists the sizes that can be registered.
Input units
Inch models
Metric models
Custom paper sizes can be added for each paper source.
Use the procedure below to select a custom paper size.
OPERATION GUIDE
[ Exit ]
a b
Cassette:
Paper Feeder PF-100:
MP Tray:
Cassette:
Paper Feeder PF-100:
MP Tray:
Default Setting (System Menu)
4
Press the OK key. The Orig./Paper Set. menu
appears.
5
Press the or key to select [Def. Orig. Size].
6
Press the OK key. Def. Orig. Size appears.
7
Press the or key to select the paper size to be
used as the default value.
8
Press the OK key. Completed. is displayed and the
screen returns to the Orig./Paper Set. menu.
Dimensions
X: 4.13 to 8.50" (in 0.01" increments)
Y: 5.83 to 14.02" (in 0.01" increments)
X: 5.83 to 8.50" (in 0.01" increments)
Y: 8.27 to 14.02" (in 0.01" increments)
X: 2.75 to 8.50" (in 0.01" increments)
Y: 5.83 to 14.02" (in 0.01" increments)
X: 105 to 216 (in 1 mm increments)
Y: 148 to 356 (in 1 mm increments)
X: 148 to 216 (in 1 mm increments)
Y: 210 to 356 (in 1 mm increments)
X: 70 to 216 (in 1 mm increments)
Y: 148 to 356 (in 1 mm increments)
8
8-9