Table of Contents
Advertisement
Basic Operation
Confirm Destination Screen
If the screen for confirming the destination before transmission (page 8-60) is set to [On], Check through the all
destination and press [Next]. appears when the Start key is pressed.
Use the procedure below to operate the Confirm Destination screen.
Destination List: a b
p Morgan@kyoceramitaN
*********************
b 0667640000
b 0667741234
[ Cancel ] [
p Morgan@kyoceramNa b
1
Detail
2
Delete
Set original
and press Start key.
[ Cancel ]
Check the destination
list through the end.
3-28
1
Press the
Press the OK key to edit or delete the selected
destination.
To add a destination, press [Cancel] (the Left
Next
]
Select key) to return to the previous screen.
2
After the checking is finished, press [Next] (the
Right Select key). Set original and press Start key.
is displayed on the screen.
If there are destinations that are hidden and not yet
checked, the screen displays Check the destination
list through the end. and returns to the Destination
List screen. Check all destinations.
3
Place the original on the platen and press the Start
key. Transmission starts.
or
key to check all destinations.
OPERATION GUIDE
Advertisement
Table of Contents
