Chapter 3: Vxi Programming Using The Ieee 1394 Serial Bus; Chapter 4: Ieee 1394 Fundamentals And Interface Overview; Appendix A: Specifications; Appendix B: Editing The Hp E8491B Resource Manager Configuration - HP E8491B IEEE 1394 Configuration And User's Manual

Chapter 3: VXI
Programming Using the
IEEE 1394 Serial Bus
Chapter 4: IEEE 1394
Fundamentals and
Interface Overview
Appendix A:
Specifications
Appendix B: Editing the
HP E8491B Resource
Manager Configuration
Additional
Information
12 Introduction
This chapter contains the information necessary to begin communicating
with VXI instruments through the HP E8491B and IEEE 1394 serial bus.
The chapter contains information on optimizing system performance using
block data transfers, and also covers triggering and using HP E8491B shared
memory.
This chapter describes the IEEE 1394 serial bus and how it is implemented
in HP VXI systems. It defines the bus terminology and data transfer
protocol.
Appendix A contains the operating and performance specifications of the
HP E8491B.
Appendix B contains information on editing your VXI system configuration
as set by the resource manager. It describes selected configuration files and
utility functions used to view and modify your configuration.
Programming the HP E8491B is through HP VISA and HP SICL functions.
Although this manual identifies the specific functions used, you will need to
refer to the HP VISA and HP SICL manuals for detailed information.
Also, included with the HP I/O Libraries is the utility 'I_O Config'. This
utility is used to configure the HP E8491B and has a help file associated with
it.
Note
Pop-up or pull-down menus displayed by the HP I/O Libraries software
will show I/O Libraries as "I_O Libraries" and I/O Config as "I_O Config"
because the "/" cannot be displayed. The "/" character is therefore replaced
by the underscore character.
Chapter 1