Creating A Traffic Behavior - HP V1910 User Manual

Item
Customer VLAN
ACL IPv4
Return to QoS policy configuration task

Creating a traffic behavior

Select QoS  Behavior from the navigation tree and click the Create tab to enter the page for creating a
traffic behavior, as shown in a.
The page for creating a traffic behavior
a.
2 describes the configuration items of creating a behavior.
Configuration items of creating a behavior
2.
Item
Behavior name
Return to QoS policy configuration task
Description
Define a match criterion to match customer VLAN IDs.
If multiple such match criteria are configured for a class, the new configuration
does not overwrite the previous one.
You can configure multiple VLAN IDs each time. If the same VLAN ID is
specified multiple times, the system considers them as one. The relationship
between different VLAN IDs is logical OR. You can specify VLAN IDs in two
ways:

Enter a range of VLAN IDs, such as 10-500. The number of VLAN IDs in the
range is not limited.

Specify a combination of individual VLAN IDs and VLAN ID ranges, such as
3, 5-7, 10. You can specify up to eight VLAN IDs in this way.
Define an IPv4 ACL-based match criterion.
The ACLs available for selection are existing IPv4 ACLs.
list.
Description
Specify a name for the behavior to be created.
list.
437