HP V1910 User Manual page 417

Configure isolated ports for an isolation group
a.
 Select Isolate port for the port type.
 Select GigabitEthernet 1/0/2, GigabitEthernet 1/0/3, and GigabitEthernet 1/0/4 on the chassis
front panel.
Click Apply. A configuration progress dialog box appears.

After the configuration process is complete, click Close in the dialog box.

# View information about the isolation group.
Click Summary. The page shown in
Information about port isolation group 1
b.
As shown on the page, port isolation group 1 contains these isolated ports: GigabitEthernet 1/0/2,
GigabitEthernet 1/0/3, and GigabitEthernet 1/0/4.
b appears.
405