HP V1910 User Manual page 166

a port from the voice VLAN if no packet is received from the port during the aging time. Assigning
ports to and removing ports from a voice VLAN are automatically performed.
 In manual mode, you need to manually assign an IP phone accessing port to a voice VLAN. Then, the
system matches the source MAC addresses carried in the packets against the device's OUI addresses.
If a match is found, the system issues ACL rules and configures the packet precedence. In this mode,
assigning ports to and removing ports from a voice VLAN are performed manually.
Both modes forward tagged packets according to their tags.
1 lists the relationships between the voice assignment VLAN mode, the voice traffic type of an IP phone, and
the port link type.
Co-relation
1.
Voice VLAN
Voice traffic
assignment
type
mode
Tagged voice
traffic
Automatic
mode
Untagged
voice traffic
Tagged voice
traffic
Manual
mode
Untagged
voice traffic
NOTE:
If an IP phone sends tagged voice traffic and its accessing port is configured with 802.1X
authentication and guest VLAN, you must assign different VLAN IDs for the voice VLAN, the port
VLAN ID (PVID) of the accessing port, and the 802.1X guest VLAN.
If an IP phone sends untagged voice traffic, to implement the voice VLAN feature, you must configure
the PVID of the IP phone's accessing port as the voice VLAN. As a result, 802.1X authentication cannot
be implemented.
Port link type
Access Trunk
Supported, but you must
ensure that the PVID of
the port has been
Not supported created and is not the
voice VLAN and the
traffic of the PVID can
pass through the port.
Not supported Not supported
Supported, but you must
ensure that the PVID of
the port has been
Not supported created and is not the
voice VLAN and the
traffic of the PVID can
pass through the port.
Supported, but you must
Supported, but configure the PVID of
you must the port as the voice
configure the PVID VLAN and configure the
of the port as the port to allow the traffic
voice VLAN. of the voice VLAN to
pass through.
154
Hybrid
Supported, but you must
ensure that the PVID of the
port has been created and is
not the voice VLAN and the
traffic of the PVID can pass
through the port tagged.
Not supported
Supported, but you must
ensure that the PVID of the
port has been created and is
not the voice VLAN and the
traffic of the voice VLAN can
pass through the port
tagged.
Supported, but you must
configure the PVID of the port
as the voice VLAN and
configure the port to allow
the traffic of the voice VLAN
to pass through untagged.