HP V1910 User Manual page 282

Configure a default route
b.
# Configure a static route to Switch A and Switch C respectively on Switch B.
 Select Network  IPv4 Routing from the navigation tree of Switch B, and then click the Create tab to
enter the page shown in c.
Type 1.1.2.0 for Destination IP Address.

Select 24 (255.255.255.0) from the Mask drop-down list.

Type 1.1.4.1 for Next Hop.

Click Apply.

Type 1.1.3.0 for Destination IP Address.

Select 24 (255.255.255.0) from the Mask drop-down list.

Type 1.1.5.6 for Next Hop.

Click Apply.

270