Aaa Configuration Example - HP V1910 User Manual

Item
Secondary
Method
Return to Configuration task

AAA configuration example

Network requirements
As shown in a, configure the switch to perform local authentication, authorization, and accounting for
Telnet users.
Network diagram for AAA configuration example
a.
Configuration procedure
NOTE:
Enable the Telnet server function on the switch and configure the switch to use AAA for Telnet users. The
configuration steps are omitted.
# Configure IP addresses for the interfaces. (Omitted)
# Configure a local user.
Select Device  Users from the navigation tree and then select the Create tab, as shown in a.

Description

None—Performs no accounting.

RADIUS—Performs RADIUS accounting. You must specify the RADIUS scheme to be
used.

Not Set—Uses the default accounting methods.
list.
358